ZIRCON Leak Alert™ X

SKU: ZN-WDX

Barcode: 042186705140

Smart Water Detector

The Zircon® Leak Alert™ X Smart Water Detector provides audible, visual, and email alerts when it detects water, warning you to a potential water leak. Powered by one 3V lithium battery, the Leak Alert™ X connects to Wi-Fi, eliminating the need for a separate hub. Compact and lightweight, the Leak Alert™ X Smart Water Detector consists of two parts: The detector alarm housed in a plastic, magnetic case, and an attached 9.8 ft. (3 m) sensor cable to enable discreet leak detection in areas not typically accessible with a standard detector. A complete solution can be created by placing an unlimited number of detectors throughout your property as each Leak Alert X operates independently and is individually named during the setup process. To configure, link each detector to your Wi-Fi, then enter the detector location and contact information. Place the detector on any surface, mount on a wall, or affix to a magnetic surface. The sensing contacts must lay flat against the surface in order to detect water. Once moisture is detected, a loud SOS alarm will sound, red LEDs will flash, and an email alert notification will be sent, via Wi-Fi, to up to 5 configured email addresses. Ideal for single family homes, multi-unit apartments, office buildings, rental properties, hotels, and schools. Place a Leak Alert™ X Smart Water Detector anywhere the potential for flooding or leaks exists such as: Water heaters; Sink and water filtration units; Washing machines; Dishwashers and refrigerators; Fish tanks/aquariums; Sump pumps; Plumbing and toilets.

Features:

• Wi-Fi connectivity–No hub required
• Audible, visual and email alerts for leak notification while at home or away
• Magnetic detector case with 84 dB alarm and built-in surface mount for easy installation within earshot
• Attached 9.8 ft. (3 m) sensor cable for leak detection in hard-to-reach places
• Low battery warning chirps and sends email notifications when battery is low or needs to be replaced
• Optional report log sent to email every 6 days
• Free software updates

Specifications:

• Detector Dimensions: 109mm x 30mm x 63.5mm
• Sensor Cable Dimensions: 3m
• Sensing Contacts Dimensions: 61mm x 7mm x 20mm
• Weight: 130g (Including cable and battery)
• Battery Type: 3V (CR123A/CR17345) Lithium, required
• Low Battery: Indicated by chirping every 30 seconds. One email notification will be sent per 24-hour period for life of the battery.
• Operating Temperature: 0° to 41°C
• Storage Temperature: -20° to 60°C
• Humidity: 90% RH maximum (non-condensing)
• Shock Resistance: From a 6 ft. (1.8 m) drop onto concrete
• Water Resistance: Splash and water resistant, not waterproof