ZIRCON MultiScanner® i520 OneStep®

SKU: ZN-I520

Barcode: 042186605914

Multifunction Wall Scanner with CenterVision® Technology, Ultra-Bright Display Screen, and Auto Correcting Technology

MultiScanner® i520 OneStep® quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

Features:

• StudScan mode locates the edges and center of wood or metal studs up to 3?4 in. (19 mm) deep
• DeepScan® mode doubles the scanning depth to 11?2 in. (38 mm)
• AC Scan mode locates live, unshielded electrical wire up to 2 in. (51 mm) deep
• Metal Scan mode locates ferrous metal, such as rebar, up to 3 in. (76 mm) deep
• ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud

Specifications:

• Dimensions: 185mm x 83mm x 36mm
• Weight: 184g (without battery)
• Battery Type: 9V alkaline (not included)
• Depth: StudScan mode is up to 19mm, DeepScan mode is up to 38mm, and Metal Scan mode is up to 76mm
• Position Accuracy: Up to a depth of 19mm is within 3mm and up to a depth of 38mm is within 5mm
• WireWarning Position Accuracy: Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
• WireWarning Depth: In typical wall with Romex wiring, wire can be detected up to 2 in. (51 mm) deep
• Operating Temperature: -7° to 41°C
• Storage Temperature: -29° to 66°C
• Humidity: 5 - 90% RH (non-condensing)
• Water Resistance: Splash and water resistant, not waterproof